The E300RW6 is a semi-remote unit that is designed for external wall installation and comes equipped with two spigots for ducting connection to internal supply and extract grilles. With a heat recovery of up to 70% the E300RW6 provides a balanced supply and extraction of air.
Fresh pre-warmed air from outside is continuously circulated into the room whilst stale air and odours are extracted. The E300RW6 unit controls condensation and eliminates mould whereas the unique plastic heat exchanger transfers heat from outgoing air to the fresh air supply without cross contamination.
With so many controls swimmers are able to create their desired environment, maintaining internal temperatures, controlling internal relative humidity and providing a fresh environment with ease.
Available in three speeds: 75, 210 and 280m³/h.
Spigots: 150mm diameter
Max ventilation rate: 280.0m³/h
Low Supply Rate: 70.0m³/h
Mains electrical supply: 230VAC 50Hz
Complies to the following approvals/directives: LVD, EMC and CE
Normal Supply Rate: 190.0m³/h
Normal Extract Rate: 210.0m³/h
Boost Supply Rate: 270.0m³/h
Boost Extract Rate: 280.0m³/h
N° speed settings: 3m³/h
The unit has been designed specifically for installation in an external wall providing 150mm diameter spigots on the inner plate for ducted extraction and fresh air supply. It should be mounted through the wall in a vertical (level to assist in-built condensate drainage) position within a 280mm wide and 380mm high hole. The E300RW6 also requires a minimum overhang of 70mm on the outside and 50mm inside.
Ducting spigots: the unit should have 2-N° 150mm Ø x 50mm spigots.
Your rights to return goods are protected under the EU Distance Selling Directive.
You are entitled to cancel your order and return the goods within 7 working days for a full refund not including the cost of delivery. Do this by contacting us by email or telephone and quoting the order number supplied to you. Your refund will be paid within 30 days. You are responsible for the cost and risk of loss or damage when returning the goods, so you should take out enough postal insurance to cover their value. This cancellation policy does not affect your rights when we are at fault - for example, if goods are faulty or incorrectly-described.
Exclusions: Bespoke items (made to measure items) are not included and cannot be returned. If a bespoke item is faulty then the product warranty /guarantee will take effect.
Any goods returned should be in saleable condition.
These terms apply to your order. We may change our terms and conditions at any time, so please do not assume that the same terms will apply in the future.
None of these terms affect your legal rights and these are not diminished in any way. If any term is held to be invalid under any applicable statute or rule of law, that term is automatically omitted from the terms to minimum extent necessary to comply with the law and without affecting the validity or enforceability of the remainder.