Swimming Pool Heaters & Accessories - ECO Heat Pumps

£445.00
In Stock Icn Tick
  • 'ECO' Heat Pumps
  • The ideal solution to heating your above ground or small inground pool
  • Compact for easy installation
  • Single phase/running current 3.4Amps - 10.6Amps (dependent on model)
  • High efficiency coefficient up to 4.7
  • Automatic frost protection - when air temperature drops under 8degC will turn off
  • Quiet running with low sound rotary compressor, low noise fan
  • R410A gas for an environmentally friendly operation
  • Titanium heat exchanger resistant to salt and chlorine
  • Including drain and flow switch
  • Winter cover included
  • Free Bypass included
  • Maximum pool volume depending on average outside temperature
  • FREE DELIVERY - See main description for exclusions
  • Heat pumps are one of the most highly efficient and economicl ways to heat your pool.
  • Heat pumps utilise the sun's free heat by collecting and absorbing energy from the outside air.  This enegy is then transferred to the pool water.  Your existing pool pump circulates the water through the heater and warms the pool.  The unit contains a fan that draws in outside air and directs it over the surface of the EVAPORATOR (energy collector). The liquid refrigerant within the EVAPORATOR coil absorbs the heat from the outside air and then refrigerant becomes gas.  The warm gas passes through the compressor where it is compressed to form a very hot gas, which then passes through the condenser (water heat exchanger).  It is here that the heat exchange occurs as the hot gas gives up the heat to the cooler swimming pool water circulating through the coil. The pool water becomes warmer and the hot gas is cooling down as it flows through th condenser coil, returns to its liquid form and, after passing through the expansion valve, the whole process begins again.
  •  
  • 'ECO' Heat Pumps
  • The ideal solution to heating your above ground swimming pool or small inground pool
  • 3KW = Max Pool Volume for this model: 15m3
  • 5KW = Max Pool Volume for this model: 20m3
  • 8KW = Max Pool Volume for this model: 30m3
  • 10KW = Max Pool Volume for this model: 45m3
  • 12KW = Max Pool Volume for this model: 60m3  
  • (Pool volume is Length x Width x Av Depth - Cubic Feet to Cubic Metres = 0.0283)
  • eg. 10ft x 20ft x 4ft = 800 x 0.0283 = 22.65m3
  • 3KW = 750/290/500mm LxWxH(dimensions)
  • 5KW = 750/290/500mm LxWxH(dimensions)
  • 8KW = 930/350/550mm LxWxH(dimensions)
  • 10KW = 930/350/550mm LxWxH(dimensions)
  • 12KW = 1000/360/620mm LxWxH(dimensions)
  • Single Phase Power (220V-240Ph-50Hz)
  • High efficiency coefficient up to 4.7
  • Summer Season model (May-Sept) Minimum operating temperature 8 Degrees Centigrade
  • Compact for easy installation
  • Single phase/running current 3.4Amps - 10.6Amps (dependent on model)
  • Quiet running with low sound rotary compressor, low noise fan
  • R410A gas for an environmentally friendly operation
  • Titanium heat exchanger resistant to salt and chlorine
  • Precision temperature control
  • Freeze prevention mode
  • 2yrs PARTS & LABOUR WARRANTY
  • For full specification, or further information, please send your email address for an on-line brochure.
  • FREE DELIVERY to UK Mainland is included - excluding Scottish Highlands, Isle of Wight, Isle of Man, Channel Islands & Northern Ireland. Please call for a quote giving the postcode.

Returns Policy


Your rights to return goods are protected under the EU Distance Selling Directive.

You are entitled to cancel your order and return the goods within 7 working days for a full refund not including the cost of delivery. Do this by contacting us by email or telephone and quoting the order number supplied to you. Your refund will be paid within 30 days. You are responsible for the cost and risk of loss or damage when returning the goods, so you should take out enough postal insurance to cover their value. This cancellation policy does not affect your rights when we are at fault - for example, if goods are faulty or incorrectly-described.

Exclusions: Bespoke items (made to measure items) are not included and cannot be returned. If a bespoke item is faulty then the product warranty /guarantee will take effect.

Any goods returned should be in saleable condition.

These terms apply to your order. We may change our terms and conditions at any time, so please do not assume that the same terms will apply in the future.

None of these terms affect your legal rights and these are not diminished in any way. If any term is held to be invalid under any applicable statute or rule of law, that term is automatically omitted from the terms to minimum extent necessary to comply with the law and without affecting the validity or enforceability of the remainder.