Description
Hydro Pro (Inverter type) Heat Pumps (Energy Label A)
The Inverter heat pump offers the ability to vary the heating capacity to suit weather conditions. Using the new automated Power/Smart/Silent modes, the compressor and fan speeds can be varied to reduce noise levels and energy by up to 50%. Heat pumps are one of the most highly efficient and economical ways to heat your pool. They utilise the sun’s free heat by collecting and absorbing energy from the outside air. This energy is then transferred to the pool water. Your pool pump circulates the water through the heater and warms the pool. The ideal solution to heating your larger Above Ground swimming pool or in ground pool. The Hydro Pro Inverter Heat Pump is suitable for either an extended swimming season (April – October), all year round swimming or just a summer swimming season (May – September). The Hydro Pro Inverter Heat Pumps can cater for all pool sizes – see our guide below for models and pool volume size.
XP07DCsi+ = Max Pool Volume for this model up to: 20 – 35m3
XP10DCsi+ = Max Pool Volume for this model up to: 30 – 53m3
XP13DCsi+ = Max Pool Volume for this model up to: 40 – 70m3
XP17DCsi+ = Max Pool Volume for this model up to: 45 – 79m3
XP21DCsi+ = Max Pool Volume for this model up to: 55 – 96m3
XP26DCsi+ = Max Pool Volume for this model up to: 75 – 131m3
XP26DCsiT+ = Max Pool Volume for this model up to: 75 – 131m3
XP35DCsi+ = Max Pool Volume for this model up to: 100 – 175m3
XP26DCsiT+ = Max Pool Volume for this model up to: 100 – 175m3
To work out how much water your pool holds follow this example:
(Pool volume is Length x Width x Av Depth – Cubic Feet to Cubic Metres = 0.0283)
eg. 10ft x 20ft x 4ft = 800 x 0.0283 = 22.65m3
Single Phase Power (220V-240Ph-50Hz), Three Phase Power (380/3/50)
The heat pump Inverter provides the opportunity to automatically adjust heating capacities to suit weather conditions
By using Power/Smart/Silent modes you can reduce energy use
Efficiency COP up to 13
“All seasons” model works down to -5degC.
Single phase/maximum current 4.2Amps – 17.07Amps (dependent on model), Three phase 11.43Amps – 15.46Amps
Easy digital temperature control with LCD display
All functions are micro-processed controlled
Quiet running with low sound rotary compressor, low noise variable speed fan
Soft start, no voltage peaks
R410A gas for an environmentally friendly operation
Automatic Defrost
Titanium heat exchanger resistant to salt and chlorine
Including drain and flow switch
Steel cabinet
Winter cover included
Maximum pool volume depending on average outside temperature
2yrs PARTS & LABOUR WARRANTY
For full specification, or further information, please send your email address for an on-line brochure.
FREE DELIVERY to UK Mainland is included – excluding Scottish Highlands, Isle of Wight, Isle of Man, Channel Islands & Northern Ireland. Please call for a quote giving the postcode.
